14:57 Aug 4, 2016 |
English to Russian translations [PRO] Tech/Engineering - Forestry / Wood / Timber / Panel Dividing | |||||
---|---|---|---|---|---|
|
|
Summary of answers provided | ||||
---|---|---|---|---|
3 +1 | (лентошлифовальная) головка типа H |
| ||
4 | Н-агрегат / агрегат типа Н |
| ||
2 | Съемная головка/диск H (H-Head) |
|
Discussion entries: 4 | |
---|---|
h head Съемная головка/диск H (H-Head) Explanation: Two novelties of the BÜTFERING brand will also be shown at the HOLZMA Treff. Among those, the totally re-engineered SWT 200 series with more high tech and lower space requirement, shorter set-up time and improved user convenience. The extraction values of the SWT 200 are up to 35 per cent lower than those of the previous version and the machine is very easy to operate. The H head with inner chevron belt enables high-quality fine sanding and a degree of flexibility which is remarkable in this performance class. Moreover, two additional aggregate slots for post-processing are available now. Also on exhibition: the SWT 300 with powerTouch and Sanding Center for intuitive operation. The special feature: By using the Sanding Center the operator can control settings at the machine by means of touch and gesture. Operating the SWT has never been easier! http://www.homag-group.com/en-en/news/newsdatabase/holzma/Pa... The all new BÜTFERING SWT 200 Series sanding machine www.homag-group.com/.../TheallnewBÜTFERINGSWT200Seriessan..... The all new BÜTFERING SWT 200 Series carries on that tradition offering highly flexible and compact sanding solutions. http://homaggroupwebapp.homag.de/Medien/The all new BÜTFERIN... Comprehensive selection of head types The SWT 200 Series offers a choice of four heads which can be specified in single and twin head configurations to give seven different machine types. All the heads feature a simplified head locking system which enables quick and simple changing of sanding belts. Designed for flat surfaces, the combination L-Head uses a contact roller for calibration and an air cushion sanding pad system (acp) for fine sanding applications. This pneumatic pressure pad system delivers the right pressure over the entire working width. In the same way, the combination C-Head also features a contact roller for calibration but with the addition of the electronic pneumatic pad system (eps) for sanding. The machines’ electronics ensure the optimum sanding pressure on all areas of a work piece. The pressure pad consists of separate segments which are applied to match the work piece shape. Offering thickness tolerance compensation of up to 2mm, the system is perfect for intermediate and fine sanding of solid wood, along with veneer and lacquer sanding. The R-Head has been designed for calibration and preparation of surfaces to provide a mechanical key for glueing. It is very efficient with high stock removal rates whilst avoiding the so called ‘wash-out’ effect. Oscillation marks are a thing of the past A new addition is the inclusion of an H-Head which leaves no oscillation (snake) marks and sands at lower temperatures to increase the lifetime of the sanding belt. Featuring a chevron belt, the H-Head delivers a smooth and extremely consistent surface finish making it most suitable for veneer, lacquer and filler sanding. It also offers a wide range of useful grit sizes up to P1200 grit. http://osntm.ru/shlifovanie.html -------------------------------------------------- Note added at 26 mins (2016-08-04 15:23:52 GMT) -------------------------------------------------- (вот и моя беда. Пока докопаюсь...) |
| |
Login to enter a peer comment (or grade) |
h head (лентошлифовальная) головка типа H Explanation: Думаю, не нужно переводить "H" - хотя можно, наверное, докопаться до истоков такого обозначения. См. ссылку -------------------------------------------------- Note added at 28 мин (2016-08-04 15:25:46 GMT) -------------------------------------------------- Не совсем понятно, что такое "полигональный" ременный привод. Может, он "шевронный"? Вообще, странно, т.к. во-первых, на картинках для этого вида головки нет "шевронного" ремня. А в немецком варианте там вообще применяется термин "Drucklamellenbands", что можно перевести как "шлифовальная лента с секционным прижимным устройством". -------------------------------------------------- Note added at 31 мин (2016-08-04 15:28:35 GMT) -------------------------------------------------- P.S. это все при условии, что источник "угадан" верно Reference: http://www.buetfering.de/en-en/products/technology/heads/Pag... Reference: http://www.buetfering.de/de-de/products/technologie/Aggregat... |
| |
Login to enter a peer comment (or grade) |
h head Н-агрегат / агрегат типа Н Explanation: В немецком варианте каталога используется термин "H-Aggregat" http://www.buetfering.de/de-de/products/technologie/Aggregat... См. также переведенный на русский язык каталог этого производителя здесь: http://www.homag-group.com/Medien/SWT_300_V_32070.pdf (стр. 7, Н-агрегат) |
| |
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.