If you go to section 10.4 of MSDS, you will find that it talks about incompatible materials, so distribution of ban is a red herring.

CCCCCCCCCCCCCC
SECTION 10 – STABILITY AND REACTIVITY

Stable under normal temperature and pressure.

Distribution of Ban: Strong oxidizer, strong acid and corrosives

Conditions to Avoid:
Fire source, heating source, disassemble, external short circuit, crushes, deformation, high temperature above 100℃,
direct sunlight and high humidity, immerse in water or overcharge.

Hazardous Polymerization: Will not occur

http://www.gearwrench.com/MagentoShare/media/mannuals/MSDS_G...

ccccccc
The MSDS A Basic Guide For Users - International Version

SECTION 10 STABILITY AND REACTIVITY
a. Chemical stability:
b. Conditions to avoid:
c. Incompatibility with other materials:
d. Hazardous decomposition products:
e. Hazardous polymerization:

10. Stability And Reactivity
SECTION 10 STABILITY AND REACTIVITY
a. Chemical stability:
b. Conditions to avoid:
c. Incompatibility with other materials:
d. Hazardous decomposition products:
e. Hazardous polymerization:
This section of the MSDS indicates how stable the material is and describes any conditions under which it is unstable or can react dangerously. Unstable materials may break down (decompose) and cause fires or explosions or cause the formation of new chemicals which have different hazards. For example, these new chemicals (decomposition products) may be more toxic or flammable than the original material. Conditions such as heat, sunlight, and aging of the chemical can cause unstable chemicals to break down. Therefore, these materials require special storage and handling precautions.
Some chemicals can create a hazard because they have a tendency to undergo a particular type of chemical reaction called "polymerization". This reaction may generate a lot of heat, may generate enough pressure to burst a container or may be explosive. Chemicals which tend to react in this way often contain additives called inhibitors which reduce or eliminate the possibility of an uncontrolled polymerization.

Some materials may create a hazard if they come in contact with water (water-reactive chemicals). Others may be pyrophoric, meaning they can ignite spontaneously when exposed to air.

Incompatible materials are materials which may react violently or explosively if they are mixed or brought together. These materials should be stored separately and should not be mixed unless special procedures are followed.

You need to be aware of the information in this section so you can store and handle the material safely and avoid mixing incompatible materials.


ccccccccccc
Substancje zdolne/ niezdolne do jednorodnego mieszania: Unikać kontaktu z: Mocne kwasy. Mocne zasady.

http://ccinfoweb.ccohs.ca/help/msds/msdsINTGUIDE.html

ccccccc
10.4. MATERIAŁY NIEZGODNE
Karta charakterystyki substancji niebezpiecznej powinna uwzględniać również materiały niezgodne, czyli substancje, które mogą wchodzić w niebezpieczne reakcje z danymi mieszaninami. Mogą to być np.: kwasy, zasady itp.

https://properfekt-msds.pl/karta-charakterystyki/format-kart...

karta charakterystyki część 10 - https://isn.page.link/1o47