Glossary entry (derived from question below)
Slovak term or phrase:
potrubná trieda
English translation:
pipe class
Added to glossary by
Zuzana Lancosova
Sep 27, 2011 12:39
12 yrs ago
Slovak term
potrubná trieda
Slovak to English
Tech/Engineering
Engineering: Industrial
Piping stress analysis
Aký je správny anglický termín na potrubnú triedu, napr. potrubie 8”, SCH 40 (DN200/219,1mmx8,18mm), potrubná trieda P-150-2? Asi to nebude "pipe class". Dakujem.
Proposed translations
(English)
4 | pipe class | Vladimír Hoffman |
3 +1 | piping class | Michal Zugec |
4 | Nominal Pipe Size (NPS) , Nominal Diameter (DN) | Anton Šaliga |
Proposed translations
6 hrs
Selected
pipe class
4.2 Zařazení do potrubních tříd - skupiny
Potrubní třída zpravidla charakterizuje skupinu potrubí s podobnými vlastnostmi.
In piping engineering practice, according to the service, fluid, design pressure and design temperature thing are (Piping material, pressure rating of the flanges, pipe thickness, type of joint, etc) are classified and tabulated. This is called pipe class.
Ale piping clas je tiez dobre a zauzivane.
Potrubní třída zpravidla charakterizuje skupinu potrubí s podobnými vlastnostmi.
In piping engineering practice, according to the service, fluid, design pressure and design temperature thing are (Piping material, pressure rating of the flanges, pipe thickness, type of joint, etc) are classified and tabulated. This is called pipe class.
Ale piping clas je tiez dobre a zauzivane.
4 KudoZ points awarded for this answer.
Comment: "Thank you. It was helpful."
+1
4 mins
piping class
Vyzerá to že na nete je veľa takýchto odkazov.
Example sentence:
Piping Class is something like ANSI Class
18 hrs
Nominal Pipe Size (NPS) , Nominal Diameter (DN)
NPS - sizes are measured in inches
DN - is the European designation equivalent to NPS - measured in millimetres
Pri špecifikovaní rozmerov rúr potrubia neexistuje jednoznačná trieda, jedno číslo, označenie, ktoré by exaktne popísalo, o akú rúru ide. Vždy je potrebné uviesť NPS resp. DN (spravidla ako vnútorný orientačný priemer, vonkajší priemer je týmto daný pre všetky hrúbky steny) a hrúbku steny rúry (schedule-SCH), čím je rúra presne označená;
napr. v tomto prípade -potrubie 8”, SCH 40 (DN200/219,1mmx8,18mm) je vonkajší priemer presne 219,1mm a hrúbka steny 8,18mm, teda vnútorný priemer potom bude 202,74 mm
Pozri príslušný riadok v tabuľke na wikipedii.
Možné použiť ktorýkoľvek z uvedených 2 termínov.
DN - is the European designation equivalent to NPS - measured in millimetres
Pri špecifikovaní rozmerov rúr potrubia neexistuje jednoznačná trieda, jedno číslo, označenie, ktoré by exaktne popísalo, o akú rúru ide. Vždy je potrebné uviesť NPS resp. DN (spravidla ako vnútorný orientačný priemer, vonkajší priemer je týmto daný pre všetky hrúbky steny) a hrúbku steny rúry (schedule-SCH), čím je rúra presne označená;
napr. v tomto prípade -potrubie 8”, SCH 40 (DN200/219,1mmx8,18mm) je vonkajší priemer presne 219,1mm a hrúbka steny 8,18mm, teda vnútorný priemer potom bude 202,74 mm
Pozri príslušný riadok v tabuľke na wikipedii.
Možné použiť ktorýkoľvek z uvedených 2 termínov.
Something went wrong...