Glossary entry (derived from question below)
Nederlands term or phrase:
leidinginvoering
Engels translation:
cable entry
Added to glossary by
Henk Sanderson
Feb 24, 2018 10:20
6 yrs ago
Nederlands term
leidinginvoering
Nederlands naar Engels
Techniek
Techniek: Industrieel
Het gaat om een rapport aangaande de veiligheid van een elektrische installatie. De zin waarin de term voorkomt is:
'De leidinginvoering is afgebroken. Deze moet worden vervangen om de benodigde beschermingsgraad te verkrijgen.'
'De leidinginvoering is afgebroken. Deze moet worden vervangen om de benodigde beschermingsgraad te verkrijgen.'
Proposed translations
(Engels)
| 4 +2 | cable entry |
Henk Sanderson
|
| 3 +1 | Cable transit |
Greg Irving (X)
|
| 4 | conduit inlet; pipe inlet |
Michael Beijer
|
Change log
Feb 28, 2018 14:26: Henk Sanderson Created KOG entry
Proposed translations
+2
5 uren
Henk Sanderson
Nederland
Nederland
Native in Nederlands
Specializes in field
Nederland
47 years of Engineering Experience
Native in: Nederlands (Variant: Netherlands)
Works in: Duits naar Nederlands, Engels naar Nederlands
Related KudoZ points
:
4
Selected
cable entry
Dit is de meest gebruikelijke term.
Zie ook webrefs en voorbeeldteksten
Zie ook webrefs en voorbeeldteksten
Example sentence:
The cable entry system is designed for inserting cables and electrical conduits through divider walls, junction boxes, control cabinets easily.
Cable entry systems are used for routing electrical cables, corrugated conduits or pneumatic and hydraulic hoses into switch cabinets, electrical enclosures, control panels and machines or in large heavy-duty vehicles, rolling stock and ships.
4 KudoZ points awarded for this answer.
+1
9 min
Cable transit
This could be 'cable transit' or 'cable transit sheath'
3 uren
Michael Beijer
Verenigd Koninkrijk
Verenigd Koninkrijk
Native in Engels
Works in field
Verenigd Koninkrijk
Experienced technical/patent translator
Native in: Engels (Variants: US, British) 
Works in: Nederlands naar Engels, Vlaams naar Engels, Engels naar Nederlands, and 2 more.
Related KudoZ points
:
24
conduit inlet; pipe inlet
see e.g.: https://beele.eu/web/index.php?option=com_content&task=blogc...
""CSD Embedded Pipe Inlets
Optimized gas and water tightness is obtained by applying the SLIPSIL® sealing plugs in CSD® embedded conduit inlet system or in the CSD® flanged conduit sleeves. These offer optimum ease of installation, prevent any damage to the plugs during insertion and prevent that the plugs are inserted too deep into the conduit opening.
The CSD embedded pipe system with pipe inlets are exactly fitting for the SLIPSIL sealing plugs. The inlets are provided with a collar that acts as a water barrier and fixation into the concrete. The system comes with adjustment pipes that enable the installer to adjust the embedded pipe system to the width of the formwork for casting the concrete. The adjustment pipes fit at the back of the pipe inlet and can be cut to size at site. At the other side a pipe inlet will fit to enable application of the SLIPSIL plugs at both sides. The set of inlets and adjustment pipe can be fixed to the wooden plates of the form work with specially developed fixations. The system is very stable and the material used is impact resistant to cope with the load when the concrete is vibrated to density."."
--------------------------------------------------
Note added at 3 hrs (2018-02-24 14:11:23 GMT)
--------------------------------------------------
my ref is for gas, so change "pipe" to "cable" in Asker's context.
I think Greg's answer is also correct. not sure which is better: "transit" or "inlet", although I think I prefer "inlet" for "invoering", and "transit" for "doorvoering"
""CSD Embedded Pipe Inlets
Optimized gas and water tightness is obtained by applying the SLIPSIL® sealing plugs in CSD® embedded conduit inlet system or in the CSD® flanged conduit sleeves. These offer optimum ease of installation, prevent any damage to the plugs during insertion and prevent that the plugs are inserted too deep into the conduit opening.
The CSD embedded pipe system with pipe inlets are exactly fitting for the SLIPSIL sealing plugs. The inlets are provided with a collar that acts as a water barrier and fixation into the concrete. The system comes with adjustment pipes that enable the installer to adjust the embedded pipe system to the width of the formwork for casting the concrete. The adjustment pipes fit at the back of the pipe inlet and can be cut to size at site. At the other side a pipe inlet will fit to enable application of the SLIPSIL plugs at both sides. The set of inlets and adjustment pipe can be fixed to the wooden plates of the form work with specially developed fixations. The system is very stable and the material used is impact resistant to cope with the load when the concrete is vibrated to density."."
--------------------------------------------------
Note added at 3 hrs (2018-02-24 14:11:23 GMT)
--------------------------------------------------
my ref is for gas, so change "pipe" to "cable" in Asker's context.
I think Greg's answer is also correct. not sure which is better: "transit" or "inlet", although I think I prefer "inlet" for "invoering", and "transit" for "doorvoering"
Something went wrong...