Glossary entry (derived from question below)
English term or phrase:
lead-in curve / lead-out curve
Czech translation:
náběhová / výběhová křivka
Added to glossary by
David Vašek
Jul 9, 2021 14:56
2 yrs ago
9 viewers *
English term
lead-in curve / lead-out curve
English to Czech
Tech/Engineering
Automation & Robotics
průmyslový robot
Návod k průmyslovému robotu IRB od společnosti ABB, IRB
Popis argumentů:
LeadRadius
Minimum radius of the lead-in lead-out curves expressed as percent of
circle radius.
The parameter LeadRadius must be in the range [0, 100]. If the value is
zero, then lead-in and lead-out curves are not used. If the value is 100,
then the lead-in and lead-out trajectories will coincide with the circle
perimeter. The larger the value for leadRadius, the smoother the curve
will be. A too large value however, will make the cutting tool cut the
same path twice. Default value is 80.
[LeadAngle] Data type: num
Angle determining the 'width' of the lead-in lead-out curves expressed in
degees.
The parameter LeadAngle is given in degrees and must be in the interval
[0, 100]. Default value is 50.
The parameter leadRadius is the smallest radius of the lead-in and lead-out
curves, expressed as percent of the circle radius.
Anglický text zplodili nejspíše Švédové…
Předem děkuji za nápady, jak pojmenovat toto zaoblení/zakřivení/křivku/oblouk kruhu.
Popis argumentů:
LeadRadius
Minimum radius of the lead-in lead-out curves expressed as percent of
circle radius.
The parameter LeadRadius must be in the range [0, 100]. If the value is
zero, then lead-in and lead-out curves are not used. If the value is 100,
then the lead-in and lead-out trajectories will coincide with the circle
perimeter. The larger the value for leadRadius, the smoother the curve
will be. A too large value however, will make the cutting tool cut the
same path twice. Default value is 80.
[LeadAngle] Data type: num
Angle determining the 'width' of the lead-in lead-out curves expressed in
degees.
The parameter LeadAngle is given in degrees and must be in the interval
[0, 100]. Default value is 50.
The parameter leadRadius is the smallest radius of the lead-in and lead-out
curves, expressed as percent of the circle radius.
Anglický text zplodili nejspíše Švédové…
Předem děkuji za nápady, jak pojmenovat toto zaoblení/zakřivení/křivku/oblouk kruhu.
Proposed translations
(Czech)
4 +1 | náběhová / výběhová křivka | Pavel Prudký |
4 | Vstupní / výstupní křivka | Peter Kissik |
Proposed translations
+1
10 mins
Selected
náběhová / výběhová křivka
lze použít ve více kontextech, i nepodobných
Note from asker:
Děkuji za hbitou odpověď. Uvažoval jsem velmi podobně. :) |
3 KudoZ points awarded for this answer.
5 hrs
Vstupní / výstupní křivka
.
Note from asker:
Děkuji za odpověď. |
Something went wrong...