Glossary entry (derived from question below)
Dutch term or phrase:
Fp0.1 (N/mm²)
German translation:
Druckkraft Fp(Fd)0.1 (N/mm2)
Added to glossary by
ahartje
Oct 24, 2004 06:13
19 yrs ago
Dutch term
Fp0.1 (N/mm²)
Dutch to German
Tech/Engineering
Mechanics / Mech Engineering
Laboratory
In einer Tabelle eines Laborberichts zur Untersuchung der mechanischen Eigenschaften eines Drahtes erscheint diese Abkürzung mit der entsprechenden Einheit. Es gibt keinerlei Hinweise im Text.Es steht zwischen:
Treksterkte (N/mm²), Emod. (kN/mm²), Fp0.1 (N/mm²), Rp0.1/Rm, Gelm (%)
Treksterkte (N/mm²), Emod. (kN/mm²), Fp0.1 (N/mm²), Rp0.1/Rm, Gelm (%)
Proposed translations
(German)
3 | Druckkraft Fp(Fd)0.1 (N/mm2) | George Vardanyan |
Proposed translations
1 day 1 hr
Dutch term (edited):
Fp0.1 (N/mm2)
Selected
Druckkraft Fp(Fd)0.1 (N/mm2)
Adequate ductility in tension may be assumed for the prestressing tendons if fp0.1/fpk ≥k : The value of k for use in a Country may be found in its National Annex. The recommended value is 1,1.
http://www.hut.fi/Yksikot/Silta/opinnot/rak-11/163/2003/4.pd...
CARACTERISTIQUES DES ARMATURES POUR PRECONTRAINTE Fp0,1 (KN)
http://64.233.183.104/search?q=cache:CaiKd6krXmoJ:www.italca...
Fp Driving Gear Tooth Force
Fp = Driving Gear Tooth Load
To simplify analysis, horizontal loading is generally neglected, however the gear tooth load Fp or Rp are used since they represent the maximum force seen by the shaft, independent of direction.
http://www.navsea.navy.mil/ase/Publications/ASE 2000 Symposi...
und die Druckkraft FP an:
http://www.uni-saarland.de/fak7/krueger/Lehre/ws2000/Fluidyn...
Druckkraft ( ~FD)
http://66.102.9.104/search?q=cache:hMk67QnQUmcJ:www.tu-cottb...
http://www.hut.fi/Yksikot/Silta/opinnot/rak-11/163/2003/4.pd...
CARACTERISTIQUES DES ARMATURES POUR PRECONTRAINTE Fp0,1 (KN)
http://64.233.183.104/search?q=cache:CaiKd6krXmoJ:www.italca...
Fp Driving Gear Tooth Force
Fp = Driving Gear Tooth Load
To simplify analysis, horizontal loading is generally neglected, however the gear tooth load Fp or Rp are used since they represent the maximum force seen by the shaft, independent of direction.
http://www.navsea.navy.mil/ase/Publications/ASE 2000 Symposi...
und die Druckkraft FP an:
http://www.uni-saarland.de/fak7/krueger/Lehre/ws2000/Fluidyn...
Druckkraft ( ~FD)
http://66.102.9.104/search?q=cache:hMk67QnQUmcJ:www.tu-cottb...
4 KudoZ points awarded for this answer.
Comment: "Fantastic! That includes all I need. Thank you"
Something went wrong...